199178, the city of St. Petersburg, 17th V.O. line, 54, cor. 7

LIFTS OF SHIP BLOCKS AND SHIP HULLS

The block lifts are designed for precise positioning of heavy components or large-sized equipment. They provide synchronous movement using a complex control system.

Lifting capacity:

  • 200 and 400 tons

Pressure:

  • 70 MPa
Заказать товар
FEATURES

Block lifts are used to control the movement of ships and their individual block sections, as well as submarine hulls during construction or repair, as well as mounted bridges and similar structures of roads and railways, in order to accurately establish the position in the transverse (X), longitudinal (Y) and vertical (Z) direction in a small interval of movement.

The hydraulic system of the block lifts consists of two hydraulic subsystems: ultra-high-pressure 70 MPa and low-pressure 31.5 MPa (undercarriage drive and idle movements of actuators).

The lifts are controlled locally from the operator's console in the single-user mode and wirelessly as part of a group.

SPECIFICATIONS

PARAMETER

CHARACTERISTIC

Lifting capacity at rated pressure, tf

200

400

Lift height, mm

300

300

Lifting speed mm/s

1.5

1.5

Pusher rod stroke, mm

250

250

Pushing speed, mm/s

5

5

Front wheel hydraulic actuator’s lifting capacity, tf

12

12

Rear wheel hydraulic actuator’s lifting capacity, tf

4.5

4.5

Travel speed, m/min

20

20

Dimensions, LxWxH, mm

2610х1780х2000

3380х1930х2000

Weight, tons

7.5

8.5